PRE-ASSEMBLY PREPARATION
BEFORE YOU START....
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
2. Check and ensure that you have all required contents for complete assembly.
3. Always read the assembly instructions carefully before beginning assembly.
4. The packaging and contents can be a choking hazard, therefore keep out of reach
of small children at all items.
5. Do not over tighten the bolts as this may damage the thread.
ALLOW 45 MINUTES
2 PEOPLE REQUIRED
2
58135
WARNING
To help prevent serious or fatal injuries from entanglement or falls :
* Use the correct size mattress as specified
* Upper surface of mattress must be at least 160mm below upper
edge of guard rails
* Follow all written instructions included with this bed
* Use guardrails on both sides of upper bunk
* Check the bunk bed periodically to ensure that the guardrails,
access device and other components are maintained in the
correct position and state of repair and that all connectors are
tight with nothing protruding more than 8mm
* Ensure the upper bunk is more than 2m from any ceiling fan
* Prohibit horseplay on or under bed
* Prohibit more than one person on the upper bunk
TOP BUNK AND ELEVATED
BEDS ARE DANGEROUS AND
ARE NOT RECOMMENDED
FOR CHILDREN UNDER THE
AGE OF 9.
DO NOT REMOVE THIS LABEL
