UNPACKING AND TESTING APPLIANCE
Carefully remove the appliance from the box.
Prior to installing the appliance, test to make sure the appliance operates properly by plugging
the power supply cord into a 240 Volt grounded outlet.
Test all aspects of its operation (manual switches, remote and heater) to make sure all
components are operating correctly.
As with most electronic devices, your new electric fireplace has been designed to operate at
temperatures between 5
℃
(41
℉
fireplace to reach room temperature before turning it on.
NOTE: There may be trace of odor during the first few minutes of initial use. This is
harmless, normal and will never occur again.
LOCATING THE FIREPLACE
Plan where to locate and frame the fireplace. This will save time and money later when you
install the fireplace. Before installation consider the following:
1. Where the fireplace is located must allow for wall and ceiling clearances
2. Consider a location where the fire
windows or doors.
3.
A 15 ampere, 240 Volt, 50-60 Hz branch circuit with proper ground must be available at the
location. Preferably a dedicated branch circuit should be provided to avoid circuit breake
to trip of fuses to blow.
7
NG AND TESTING APPLIANCE
Carefully remove the appliance from the box.
Prior to installing the appliance, test to make sure the appliance operates properly by plugging
0 Volt grounded outlet.
on (manual switches, remote and heater) to make sure all
components are operating correctly.
As with most electronic devices, your new electric fireplace has been designed to operate at
℉
) and 3
5
℃
(95
℉
). During the cold winter
fireplace to reach room temperature before turning it on.
NOTE: There may be trace of odor during the first few minutes of initial use. This is
harmless, normal and will never occur again.
LOCATING THE FIREPLACE
to locate and frame the fireplace. This will save time and money later when you
install the fireplace. Before installation consider the following:
Where the fireplace is located must allow for wall and ceiling clearances
Consider a location where the fireplace screen will not be exposed to direct sunlight from
60 Hz branch circuit with proper ground must be available at the
location. Preferably a dedicated branch circuit should be provided to avoid circuit breake
Prior to installing the appliance, test to make sure the appliance operates properly by plugging
on (manual switches, remote and heater) to make sure all
As with most electronic devices, your new electric fireplace has been designed to operate at
). During the cold winter months, allow the
NOTE: There may be trace of odor during the first few minutes of initial use. This is
to locate and frame the fireplace. This will save time and money later when you
Where the fireplace is located must allow for wall and ceiling clearances
place screen will not be exposed to direct sunlight from
60 Hz branch circuit with proper ground must be available at the
location. Preferably a dedicated branch circuit should be provided to avoid circuit breakers
