INSTALLATION
This section provides step-by-step instructions for installation of your fireplace.
WARNING
The outlet must be 15A/120V.
CAUTION
Do not remove the four rubber feet at the bottom of the fireplace insert or install the fireplace insert
directly on soft surfaces, which may restrict air circulation. Otherwise, it may cause a risk of fire or
damage.
1. Select a suitable location, which is not susceptible to moisture, safe, dust free, away from high traffic and
away from things may catch fire or block openings such as drapes, furniture, etc.
NOTE
This fireplace is built-in appliance and for household use only.
It is a good idea to place your fireplace near an existing outlet, for ease of electrical hook up.
2. Place the fireplace in the desired location to see how it will look in the room.
3. Place the mantel in the desired location or build a wall construction in the desired location.
4. The size of 33P is: 76 cm (Wide)
×
71 cm (High)
×
20 cm(Deep
）
The size of 39P is: 91.5 cm (Wide)
×
87 cm (High)
×
22 cm(Deep
）
5. The size of space for inserting 33 should be 80 cm(Wide)
×
73 cm (High)
×
25 cm(Deep
）
.
The size of space for inserting 39 should be 95.5 cm(Wide)
×
89 cm (High)
×
27 cm(Deep
）
.
CAUTION
Store your fireplace insert in a dry, safe and dustless place when placing the mantel or
building the wall construction.
5. If there's no
15A/120V
outlet near the desired location, install a new one near or behind mantel.
WARNING
Do not attempt to wire you own new outlets or circuits. To reduce the risk of fire, electric shock
or injury to persons, always use a licensed electrician.
6. Make sure the fireplace insert is switched off (refer to operation instruction section).
7. Plug the fireplace into a 15A/120V outlet.
8. Push the fireplace insert into place so that the panel and the finished mantel surround or wall surface are
on the same plane.
