Amano WDP900-1-0-AC Series, Руководство по установке, Страница: 12 / 16

WPR300-0-0-AC-04 March 2009 Page 12
Fixed Length Key Output Mode
Once the specified number of keys are pressed, all the buffered keys are output in
hexadecimal format:
Key Output
0 0000
1 0001
2 0010
3 0011
4 0100
5 0101
6 0110
7 0111
8 1000
9 1001
* 1010
# 1011
Doorbell (WKM900 only) 00111100
Table 1: Fixed Length Key Output Mode
Setting the Fixed Length Mode
The number of keys to be buffered and the parity option in the Fixed Length Mode is
set as follows:
1. Press and hold down key '2' for 3 seconds. The Status LED enters a fast flash
Mode and emits a long beep.
2. Enter a 3 digit number followed by the Hash Key (#). The first 2 digits specify the
key buffer length and must be in the range 00 to 11 (eleven). The third digit must
be a „0‟ where there is no parity and „1‟ where parity is added.
NOTE:
If ‘00’ is entered for the key buffer length then the Key Mode reverts to PIN
Mode.
3. On acceptance of the setting the Status LED changes to Green.
4. If the settings are rejected the Status LED changes to Red.
Blank Space