![background image](http://html.mh-extra.com/html/amano/pioneer-eclipse-225bu/pioneer-eclipse-225bu_operators-manual_2918187009.webp)
9
Operator Handle Grips
Use the operator handle grips to operate and move
the machine. The switch levers on the underside of
the handle grips, turn the motor on and off. Locate the
handle grips in a comfortable operating position and
lock the handle release lever in place. While operating
the machine, slightly raising or lowering the operators
handle will help the operator control the machine.
Switch Levers
The switch levers activate the switch module to turn the
motor on and off. The switch module will not activate
unless the switch lever safety lock is pressed first. To
operate the machine, only one switch lever has to be
engaged. This allows the operator to alternate hands
while using the machine. To stop the motor from turning,
release the switch levers.
Switch Lever Safety Lock
The switch lever safety lock is to prevent someone
from accidentally turning the machine on. To turn the
machine on, always make sure the handle is lowered in
the operators position and the handle release lever is
locked. Push and hold the switch lever safety lock with
one hand, while engaging one of the switch levers. Once
the machine has started, the switch lever safety lock can
be released.
Handle Release Lever
This handle is used to release or lock the operators
handle. Pulling up on the lever will allow the handle to
move freely. Pushing down on the lever, horizontally,
will lock the handle in place. The handle should always
be locked while in use, as well as during transport or
storage.
Cord Hook
To prevent the cord from being damaged while not is
use, wrap the cord around the cord hook and the top of
the operators handle.
Power Cord
Use only the supplied power cord with this machine. The
power cord is sized to be used with this machine. To
attach the power cord to the machine, insert plug on the
back of handle into the female receptacle of the power
cord. Properly align the plug pins with the holes of the
receptacle, push together and twist to lock the cords in
place.
How to Operate the Machine
Installing the Pad
CAUTION! Using the wrong pad on this machine
can overload the motor.
1. Place the handle in the upright (vertical) positions
and lock the handle release lever (See Figure 1).
2. Tilt the machine back on the transport wheels and let
the handle rest on the floor (See Figure 4).
3. Remove the pad retainer in the center of the pad
holder by holding the pad secure with one hand and
turn the pad retainer counter-clockwise to remove
4. Remove the pad from the pad holder.
5. Check the pad holder for any damage or warpage.
6. Align the center hole of the new pad with the pad
guide on the pad holder.
7. Holding the pad secure with one hand, insert the
pad retainer through the hole on the pad and rotate
clockwise until tight.
8. Using the handle, carefully lift the unit to its standing
position.
Figure 4
Figure 5
Figure 6
Содержание Pioneer Eclipse 225BU
