Amano American Sanders Super 7R Australia, Руководство оператора

Страница: 4 / 24

4
Operator Safety Instructions
DANGER: Failure to read the Owner’s Manual prior to operating or servicing your American Sanders machine
could result in injury to you or to other personnel; damage to the machine or to other property could
occur as well. You must have training in the operation of this machine before using it. If you or your
operator(s) cannot read English, have this manual explained fully before attempting to operate this
machine.
DANGER: A. Sanding/finishing wood floors can create an explosive or combustible environment. Do not operate
this machine around solvents, thinners, alcohol, fuels, floor finishes, wood dust or any other flammable
materials. Cigarette lighters, pilot lights, electrical sparks and all other sources of ignition should be
extinguished or avoided. Keep work area well ventilated.
B. Dust generated from sanding wood floors can spontaneously ignite or explode. Promptly dispose
of any sanding dust in a metal container clear of any combustibles. Do not dispose in a fire.
DANGER: A. Electrocution could occur if the machine is being serviced while the machine is connected to a
power source. Disconnect the power supply before servicing.
B. Electrocution or fire could occur if the machine is being operated with a damaged power cord.
Keep the power cord clear of the pad. Always lift the cord over the machine. Do not move the
machine by the power cord.
C. Shock hazard. Do not use the machine if it has been rained on or sprayed with water.
DANGER: To avoid injury keep hands, feet, and loose clothing away from all moving parts on the machine.
Disconnect the power cord before replacing the pad, changing the abrasive, or when servicing. Do
not operate the machine unless all guards are in place. Never leave the machine unattended while
connected to a power source.
WARNING: Injury can occur if protective clothing or equipment is not used while sanding. Always wear safety
goggles, protective clothing, and dust mask while sanding.
WARNING: This sander is not to be used on pressure treated wood. Some pressure treated woods contain
arsenic and sanding pressure treated wood produces hazardous dust. Inhaling hazardous dust from
pressure treated wood can cause serious injury or death. Sanding pressure treated wood decks or
uneven surfaces can damage the sander which is not covered under warranty or damage waiver.
WARNING: Any alterations or modifications of this machine could result in damage to the machine or injury to the
operator or other bystanders. Alterations or modifications not authorized by the manufacturer voids
any and all warranties and liabilities.
WARNING: Risk of explosion. Floor sanding can result in an explosive mixture of fine dust and air. Use floor
sanding machine only in a well-ventilated area free from any flame or match.
In this Operation Manual you will find three statements that you must read and observe to ensure safe operation of this
machine.
DANGER means: Severe bodily injury or death can occur to you or other personnel if the DANGER
statements found on this machine or in this Operation Manual are ignored or are not adhered to. Read
and observe all DANGER statements found in this Operation Manual and on your machine.
WARNING means: Injury can occur to you or to other personnel if the WARNING statements found on
your machine or in the Operation Manual are ignored or are not adhered to. Read and observe all
WARNING statements found in this Operation Manual and on your machine.
CAUTION means: Damage can occur to the machine or to other property if the CAUTION statements found
on your machine or in this Operation Manual are ignored or are not adhered to. Read and observe all
CAUTION statements found in this Operation Manual and on your machine.