Amanda Amanda@Work.Place Version 3.xx, Руководство по установке

Страница: 139 / 206

Chapter 12: Programming Examples 131
One-call and Two-call Faxbacks
You can use fax files and the token programming language to perform one-call and two-
call faxbacks. Most of this functionality is preconfigured for you inside Amanda using
specific mailboxes.
A one-call faxback is a call from a fax machine so that a document can be faxed to the
caller at that fax machine. Unless you have a toll-free telephone line, the faxing is at the
caller’s expense.
A two-call faxback requires two calls. Someone calls from his telephone, indicates what
documents to fax, and leaves his fax number. Amanda calls the fax machine and sends the
documents. This second call is at your expense, so you may want to do two-call faxbacks
only in your area code or under other special circumstances.
You must have already installed and configured an appropriate fax modem for Amanda
before the following examples can work. To create the documents, fax them to Amanda as
explained in “Sending Faxes to Amanda” on page 131.
Sending Faxes to Amanda
Before you can send faxes from Amanda, the data to be faxed must be stored on the hard
drive. Because Amanda uses a proprietary fax format, you must fax the data to her. You
can set up a mailbox to do both of the following:
• Receive the data that you fax to Amanda
• Store the faxes with numbered names in the C:\FAX directory, from which they
can be used in one-call and two-call faxbacks
The mailbox that performs these tasks must have:
Extension Field:
@R(G1,%S1,30)J(“C:/FAX/%S1”,””,”%X%FH”)G(999)
DND: OFF
Screen Calls: OFF
Store Messages: YES
Greeting 1: Please enter the number of the fax that you are sending new.
%S1 must not be used in any other application.
%X must be defined in 1001.PBX.
%F must be the extension that is physically connected to the fax modem and must be
set in the install.cfg file, the file controlled by the Setup utility.
Do not enter more than eight digits in response to this greeting (because of DOS nam-
ing conventions). The number you enter becomes the name of the file. For example, if
you type in 32, the fax is stored as C:\FAX\32.
N
OTE
: You must have created the C:\FAX directory previously. Amanda
does not create this directory for you.
One-call Faxback
To set up a one-call faxback, you need to use one mailbox for each document. If you have
no more than ten documents, you need only one mailbox for the greeting that supplies the
menu of available documents.