11
User Options
(Electronic Control)
Changing user options
Options such as single or double key programming, beep volume, and
maximum cooking time can be changed to suit individual preferences.
To change options:
1. Open oven door.
• If door is closed or STOP/RESET key is pressed before programming is
complete, changes are discarded and microwave exits programming
mode.
2. Press and hold key 2 for approximately 5 seconds.
• This begins options mode.
• Microwave will beep and
0P: --
displays. Microwave is now in
programming mode.
3. Press number key that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press number key again to change the option.
• Each time key is pressed, option will change.
• Match number code displayed with descriptions for desired option.
5. Press START key to save changes.
•
0P: --
shows in display.
• To change additional options, repeat steps 3 and 4.
• Changes appear after door is closed or STOP/RESET pad is pressed.
Didn’t like an option?
Factory settings are marked in bold.
To change the oven back to the
factory setting, simply select the
option that is marked in bold.
My changes weren’t
saved.
In order for any changes to
be saved, the START key
must be pressed after selecting an
option. Shutting the oven door or
pressing the STOP/RESET key will
not save changes.
Numbered Pads
Display
Options (Factory Settings in Bold)
RFS/MFS
Series
RCS/MCS
Series
1
End of Cycle Beep
OP:10
OP:11
OP:12
OP:10
OP:11
OP:12
3 second continuous beep
Continuous beep until door is opened
5 beep bursts until door is open
2
Speaker Volume
OP:20
OP:21
OP:22
OP:23
OP:20
OP:21
OP:22
OP:23
Eliminates beep
Sets volume to low
Sets volume to medium
Sets volume to high
3
Key Beep
OP:30
OP:31
OP:30
OP:31
Prevents beep when pad is pressed
Allows beep when pad is pressed
4
Keyboard Enable
Window
OP:40
OP:41
OP:42
OP:43
OP:40
OP:41
OP:42
OP:43
15 seconds after oven door is opened, keyboard disabled
30 seconds after oven door is opened, keyboard disabled
1 minute after oven door is opened, keyboard disabled
2 minutes after oven door is opened, keyboard disabled
5
Add Time During
Heating
OP:50
OP:51
OP:50
OP:51
Prevents adding heating time while oven is heating
Allows heating time to be changed while oven is heating when a
memory pad is pressed
6*
Reset to Ready Mode
OP:60
OP:61
OP:60
OP:61
Opening oven door does not reset oven back to ready mode*
Opening oven door resets oven back to ready mode.*
7*
Maximum Heating
Time
OP:70
OP:71
OP:70
OP:71
Allows 60 minutes of heating time*
Allows 10 minutes of heating time*
8
Manual Operation
OP:80
OP:81
OP:80
OP:81
Allows use of preprogrammed pads only
Allows use of manual time entry and preprogrammed pads
9
Double Digit Opera-
tion
OP:90
OP:91
OP:90
OP:91
Allows 10 (0-9) preprogrammd pads
Allows 100 (00-99) preprogrammed pads
0
Clean Filter Message
OP:00
OP:01
OP:02
OP:03
OP:00
OP:01
OP:02
OP:03
Do not display message
Display message for 24 hours every 7 days
Display message for 24 hours every 30 days
Display message for 24 hours every 90 days
*
Factory setting may vary by model