11
Part No.12804405
Quick Start Reference Guide
Refer to Product Safety Manual for Safety Statements
Complete Owner’s Manual available online
Can I change an option?
Options such as single or double pad programming, beep volume, and
maximum cooking time can be changed to suit individual preferences.
To change options:
1. Open oven door.
Z If door is closed or RESET pad is pressed before programming is complete,
changes are discarded and microwave exits programming mode.
2. Press and hold pad 2 for approximately 5 seconds.
Z This begins options mode.
Z Microwave will beep and
0P:
displays.
3. Press number pad that controls option to be changed.
Z See table below for options.
Z Current option will display.
4. Press number pad again to change the option.
Z Each time pad is pressed, option will change.
Z Match code displayed with code for desired option.
5. Press START pad to save changes.
Z To change additional options, repeat steps 3 and 4.
Z Changes appear after door is closed or STOP/RESET pad is pressed.
No metal pans
DO NOT power spray
N
umbered
Pads Display Options
1
End of Cycle Beep
OP:10
OP:
11
OP:
1
2
3 second beep.
Continuous
beep
unti
l
door
is
opened.
5
beep
bursts
unti
l
door
is
opened.
2
Key Beep Volume
OP:20
OP:2
1
OP:22
OP:23
E
l
iminates
beep.
Sets
vo
l
ume
to
l
ow.
Sets
vo
l
ume
to
medium.
Sets volume to high.
3
Key Beep
OP:30
OP:31
Prevents
beep
when
pad
is
pressed.
A
llows beep when pad is pressed.
4
A
ctive Display
OP:40
OP:4
1
OP:42
OP:43
1
5
se
c
onds
after
oven
door
is
opened,
keyboard
disab
l
ed.
30
se
c
onds
after
oven
door
is
opened,
keyboard
disab
l
ed.
1 minute after oven door is opened, keyboard disabled.
2
minutes
after
oven
door
is
opened,
keyboard
disab
l
ed.
5
On-the Fly Cooking
OP:50
OP:51
Prevents
.
6
R
eset to
R
eady Mode
OP:60
OP:6
1
Opening oven door does not reset oven back to ready mode.
7
(some models)
Maximum Heating Time
OP:70
OP:7
1
A
llows 60 minutes of heating time (some models).
A
ll
ows
1
0
minutes
of
heating
time.
8
Manual Operation
OP:80
OP:81
A
ll
ows
use
of
preprogrammed
pads
on
l
y.
A
llows use of manual time entry and preprogrammed pads.
9
(some models)
Double Digit Operation
OP:90
OP:9
1
A
llows 10 (0-9) preprogrammed pads.
A
ll
ows
1
00
(00-99)
preprogrammed
pads.
0
Clean Filter Message
OP:00
OP:01
OP:02
OP:03
Do
not
disp
l
ay
message.
Display message for 24 hours every 7 days.
Disp
l
ay
message
for
24
hours
every
30
days.
Disp
l
ay
message
for
24
hours
every
90
days.
A
ll
ows
.
Opening oven door resets oven back to ready mode.
2011 RFS Training Manual.indd 11
10/3/2011 8:36:40 AM
Содержание RFS Models
