5
Secure outer case to window sill by installing two
7
/
8
"
countersunk screws (Item 8). Use screw holes located in
front bottom edge of outer case. To make screws easier
to drive, drill
1
/
8
" pilot holes in window sill.
Screw 4" adjusting foot (Item 9) into each outside support
(Item 10) as far as it will go. (Adjustments can be made
more easily after unit is in place.) Do not attempt to
straighten outside supports or structural integrity of
support may be compromised.
Install outside supports on under side of outer case using
one ½" screw (Item 11) for each support. Mount outside
supports as close to sill as possible. Insert back tab into
large holes along both sides of outer case. Align hole in
front tab of support angle with small hole in outer case.
Drive screw into front tab.
When installing outside support brackets on solid bottom
outer case, tap screw holes in support brackets before
attaching brackets to sides of outer case.
B
A
A.
7
/
8
" countersunk screw (2 pieces)
B.
Front support rail
Secure outer case to window sill
A
B
A.
Outside support
B.
Adjusting foot
Attach adjusting foot to outside support
A.
Outside support
B.
½" screw
Install outside supports - solid bottom case
B
A
Installation assistance may be necessary. While one
person reaches around collapsed curtain assembly to
hold support bracket in place beneath case, other person
drives ½" screw from inside of case.
