background image

11

Cleaning Interior, Exterior, and Door

Clean microwave oven with mild detergent in warm water using soft sponge
or cloth. Wring sponge or cloth to remove excess water before wiping
equipment. If desired, boil a cup of water in microwave oven to loosen soil
before cleaning. 

DO NOT allow cooking residues such as grease or fat to

remain in oven interior for any length of time.

• Do NOT allow cooking residues to remain in oven cavity.
• Do NOT use abrasive cleansers or cleaners containing ammonia.

These could damage finish.

• NEVER pour water into microwave oven bottom.
• Do NOT use water pressure type cleaning systems.

Cleaning Air Intake Filter

Clean air intake filter weekly for proper air flow. Wash filter in hot water and
mild detergent. Do not use oven without filter in place. Filter is located just
below oven door.

• To remove, turn thumbscrews counterclockwise.
• To reinstall, position filter over air intake and  turn thumbscrews

clockwise.

Removing Air Intake Filter

Cleaning Discharge Air Vents

Check for a buildup of cooking vapors along discharge louvers in back of
oven monthly. Clean air vent with damp cloth to ensure proper airflow. Dry
thoroughly.

Cleaning Discharge Air Vents

Care and Cleaning

WARNING

!

To avoid risk of electrical shock,
severe personal injury or death,
unplug power cord or open circuit
breaker to oven before cleaning.

CAUTION

!

To avoid risk of product damage,
clean air filter regularly.

Thumbscrews

Discharge air vent 

Содержание Menumaster RC5KFT2














Отзывы: