![Amana LD510P Скачать руководство пользователя страница 19](http://html.mh-extra.com/html/amana/ld510p/ld510p_owners-manual_2917013019.webp)
19
Numbered Pads
1
End of Cycle Beep
2
Speaker Volume
3
Key Beep
4
Keyboard Enable
Window
5
Add Time during
Heating
6
Reset Door Open
7
Maximum Heating
Time
8
Manual Operation
9
Double Digit
User Options
Follow the instructions below to customized the
microwave oven’s operation. End-of-cycle signal,
maximum heating time and other options can be
changed to meeting your cooking needs.
1. Open oven door.
• If door is closed or RESET pad is pressed before
finishing programming sequence, oven exits
programming mode.
2. Press and hold pad 2 for approximately 5 seconds.
• After 5 seconds, signal sounds. Display shows
“OPTION”.
3. Press number pad that matches desired option.
• “OP” represents optional program mode, first
number represents option number and second
number represents functions currently selected
for option.
4. Press START pad to advance to next option. See table
for options.
5. Press number pad (0,1-3) to change option.
6. Press START pad to save changes.
• Repeat steps 4-6 to change additional options.
7. Press STOP/RESET pad or close oven door to exit
programming mode.
Optional Program
Indicator
Pad
Number
Option
Selected
Display
OP:10
OP:11
OP:12
OP:20
OP:21
OP:22
OP:23
OP:30
OP:31
OP:40
OP:41
OP:50
OP:51
OP:60
OP:61
OP:70
OP:71
OP:80
OP:81
OP:90
OP:91
Options ( ) = Factory Setting
3 second continuous beep
(Continuous Beep until door is opened)
5 beeps bursts until door is opened
Eliminates beep
Sets volume to low; 60-70dB
Sets volume to medium; 70-80dB
(Sets volume to high; 80-90dB)
Prevents signal when pad is pressed.
(Allows signal when pad is pressed.)
(30 seconds after oven door is opened, keyboard disabled)
2 minutes after oven door is opened, keyboard disabled
(Prevents adding heating time while oven is heating.)
Allows adding heating time while oven is heating.
(Allows oven to resume heating time countdown after door is opened
during cycle.)
Cancels heating time count down after door is opened during cycle.
Allows 10 minutes of heating time.
(Allows 60 minutes of heating time.)
Allows use of preprogrammed pads only.
(Allows use of manual time entry and preprogrammed pads.)
(Allows use of single digit only.)
Allows use of double digit only.
Содержание LD510P
Страница 23: ...23 ...