2
NOTES:
•
CFM information in the above table is with high velocity, permanent filter(s) as shipped with the furnace. If the furnace is shipped with two
side return filters, this table assumes both filters are used.
•
All furnaces ship as high speed for cooling. Installer must adjust blower speed as needed.
•
For most jobs, about 400 CFM per ton when cooling is desirable.
•
This chart is for furnaces installed at 0 - 4000 feet. At higher altitudes, a properly derated unit will have the same temperature rise at a particular
CFM, while the ESP at that CFM will be lower.
•
The shaded area (
)indicates ranges in excess of maximum external static pressure allowable when heating. For satisfactory operation,
external static pressure should not exceed 0.5” W.C. The data for 0.6” W.C. to 0.8” W.C. is shown for air conditioning purposes only.
•
The dashed (-----) areas indicate a temperature rise not recommended for this model.
•
The installation must be adjusted to obtain a temperature rise within the range listed on the furnace nameplate.
Model (Htg.
Tons AC
External Static Pressure, Inches Water Column
Speed As
Motor
at .5"
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
Shipped)
Speed
ESP
CFM RISE CFM RISE CFM RISE CFM RISE CFM RISE CFM
CFM
CFM
HIGH
3.0
1381
28
1319
29
1260
30
1197
32
1131
34
1055
960
847
GUD045X30B
MED
2.5
1173
33
1142
34
1103
35
1055
36
998
38
931
848
736
(MED)
LOW
2.0
908
42
901
43
884
43
855
45
815
47
760
688
602
HIGH
3.0
1458
41
1395
43
1334
45
1266
47
1188
50
1111
1015
895
GUD070X30B
MED 2.5
1270
47
1229
49
1178
51
1122
53
1060
56
986
898
778
(HIGH)
MED-LO
2.0
1019
59
1001
60
973
61
938
64
891
-----
831
750
649
LOW
1.5
782
-----
778
-----
766
-----
746
-----
708
-----
659
590
501
HIGH
4.0
1861
-----
1803
-----
1714
35
1647
37
1561
39
1457
1278
1063
GUD070X40B
MED 3.5
1699
36
1643
37
1577
38
1512
40
1431
42
1312
1164
977
(MED-LOW)
MED-LO
3.5
1519
40
1482
41
1439
42
1386
44
1316
46
1196
1063
903
LOW
3.0
1278
47
1277
47
1268
48
1227
49
1164
52
1069
937
839
HIGH
4.0
1664
47
1599
49
1532
51
1465
53
1395
56
1312
1234
1150
GUD090X35B
MED 3.5
1465
53
1439
54
1395
56
1345
58
1288
60
1218
1145
1048
(MED)
MED-LO
3.0
1089
71
1108
70
1106
70
1092
71
1059
73
1021
961
883
LOW
2.5
850
-----
845
-----
841
-----
834
-----
823
-----
801
759
688
HIGH
5.0
2271
-----
2184
36
2094
37
2000
39
1914
41
1810
1701
1552
GUD090X50B
MED 4.5
1951
40
1889
41
1837
42
1770
44
1701
46
1598
1489
1353
(MED)
MED-LO
4.0
1724
45
1695
46
1647
47
1598
49
1534
51
1412
1362
1236
LOW
3.5
1495
52
1474
53
1448
54
1407
55
1356
57
1289
1196
1036
HIGH
5.0
2358
42
2228
44
2094
47
1997
49
1896
52
1800
1680
1552
GUD115X50B
MED 4.5
1922
52
1869
52
1810
55
1743
57
1688
59
1583
1488
1364
(HIGH)
MED-LO
4.0
1699
58
1672
59
1630
61
1583
63
1526
65
1454
1369
1248
LOW
3.5
1475
-----
1462
-----
1441
-----
1414
-----
1369
-----
1317
1232
1067