manualshive.com logo in svg

Amana DS19, Сервисная инструкция

Поделиться
Скачать
Amana DS19 Скачать руководство пользователя страница 9

December 1997

9

RS1300003   Rev. 0

User Operation

Fast Freeze Mode
Fast freeze mode adjusts Deepfreeze

®

 temperature to

coldest setting. After 24 hours, Deepfreeze

®

 temperature

automatically returns to previous setting.
•

Activate fast freeze mode by pressing * pad then
FAST FREEZE pad. Indicator light will glow.

•

Deactivate fast freeze mode before automatic
reset by pressing * pad then 

FAST FREEZE pad.

Door Open Alarm
Door open alarm sounds and indicator light blinks if
either door is open for more than 3 minutes.

• Deactivate door open alarm by pressing 

ALARM

OFF pad or by closing either door.

• Activate door open alarm by pressing * pad then

holding 

ALARM OFF pad for 3 to 5 seconds. Three

short beeps indicate instructions were accepted.

High Temperature Alarm
High temperature alarm sounds and indicator light glows
if Fresh Food or Deepfreeze

®

 temperature is high for 2

hours. A blinking light signals affected compartment.
Alarm ends when proper temperature is reached.
•

Deactivate high temperature alarm by pressing
ALARM OFF pad.

Thermistor Alarm
Thermistor electronically senses Fresh Food and
Deepfreeze

®

 temperatures. Thermistor alarm sounds

and indicator lights scroll if Fresh Food or Deepfreeze

®

thermistor is not operating properly.
•

Deactivate display by pressing 

ALARM OFF pad.

If thermistor alarm sounds, contact an authorized
Amana

®

 technician immediately.

If 

ALARM OFF pad is pressed, thermistor control retests

to confirm situation has been corrected. Alarm sounds
again if thermistor is still not operating properly.

Display Lights
•

Deactivate temperature display lights by pressing *
pad then pressing 

DISPLAY OFF pad.

•

Activate temperature display lights by pressing any
of top 5 pads.

Clean Condenser Coil Light
Clean condenser coil light glows every 3 months as a
reminder to clean condenser coils. Light automatically
cancels in 72 hours.
•

Deactivate clean condenser coil light before
automatic reset by pressing 

ALARM OFF pad.

Fresh Food Features

 Caution

To avoid property damage, confirm shelf is secure
before placing items on shelf.

Fresh Food Shelves

Models feature either glass or wire shelves. Shelves
adjust up or down to meet individual storage needs.
Some models feature Spillsaver

™

 shelves. Spillsaver

™

shelves hold simple spills for easier cleaning.

 Caution

To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.

•

Remove shelves by lifting front, releasing hooks
from metal track then pulling out.

•

Replace shelves by inserting hooks into metal
track and lowering front.

EasyGlide

™

 shelves pull forward for easy access of items

in back.

Содержание DS19
































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды