Amana CT-DPTAC, Каталог

Страница: 6 / 12

6 www.amana-ptac.com CT-DPTAC
a
ccessories
Wall Sleeves
All our wall sleeves have industry standard dimensions of 42” wide x
16⅟₁₆” high. All Stonewood Beige G-90 metal wall sleeves are thermally
insulated and include a weather board for use during construction.
The WS900D, SC and INTERNAL 14⅛” depth is the industry standard.
Sleeves may be shipped separately to allow for installation during
construction. Standard Depth Sleeves
WS900E Standard PTAC sleeve
WS900SC Seacoast triple protected
WS900D-
INTERNAL
Internal drain only for
window-wall installations
(DK900D sold separately)
Extra Deep Sleeves
We offer sleeves in several depths for thicker
wall installations or special room configurations
WS9xxD1 16” to 24” in 1”
increments
WS928D1 Extra deep 28”
WS930D1 Extra deep 30”
WS936D1 Extra deep 36”
14⅛"
42"
16
1
/ 16
"
Outdoor Grilles
Available in stamped-aluminum or architecturally louvered for
application with an Amana brand WS900D wall sleeve.
AGK—Extruded aluminum architectural grille available with anod
-
ized aluminum finish or a baked-on paint finish for durability.
Choose from 3 stock colors or a custom color to blend with
your building’s exterior color scheme. Colors include:
CB (Clear Anodized), DB (Dark Brown/Bronze)
TB (Stonewood Beige), WB (White),
SB (Special/Custom Colors)
PGK—One-piece injection molded grille using a polymer blend of
engineered thermoplastic high-impact strength material with
chemical resistance and an exterior UV protective coating.
Choose from 3 stock colors:
DB (Dark Brown/Bronze), TB (Stonewood Beige), WB (White)
Standard Outdoor Grille
SGK01B Single Pack
SGK01TB Stonewood Beige
Architectural Outdoor Grille
AGK01CB Anodized Aluminum (Silver)
AGK01DB Dark Bronze/Brown
AGK01TB Stonewood Beige
AGK01WB Amana White
AGK01SB Custom Colors
PGK01DB Dark Bronze/Brown
PGK01TB Stonewood Beige
PGK01TB Amana White
AGK
or
PGK
SGK
Condensate Drain Kit
Attaches to the wall sleeve base pan for controlled internal or external
disposal of condensate.
DK900D
Condensate Drain Kit
(use with WS900E)
DK9001D
Condensate Drain Kit
(use with WS900B)
DK900D
Low-Voltage Wire Harness Kit (not shown)
For quick connections of the remote, or wired, thermostats, wired
EMS, or front desk with jumpers and connectors.
PWHK01C Wire Harness Kit
Remote Escutcheon Kit (not shown)
Optional kit for use with units controlled via a wired, remote
thermostat. Covers control touch-pad for wired thermostat
installations.
REK10B Remote Escutcheon Kit
(10-pack)
Each kit contains 80 wires and wire nuts, enough to attach a
thermostat and one additional accessory to 10 PTAC units.
Wires come in assorted colors for easy attachment.
Sub-base Kit
The fully skirted sub-base conceals wiring while providing strong
support, if needed. Plug-in receptacle and field-wiring access speeds
installation. Electrical accessories, such as fuse holders, circuit
breakers and disconnect switches, meet N.E.C. requirements.
PTSB320E 230/208V 15/20A
PTSB330E 230/208V 30A
PTSB420E 265V 15/20A
PTSB430E 265V 25A
PTSB000E Non-electrical
Skirting Skirting
Leveling Legs
Optional
Fuse Holder
Location
Optional
Power Switch and Circuit Breaker
Location
Power Receptacle
Subbase Box Assembly
Leveling Legs
Gives wall sleeve front support and helps to level the unit for
installation.
LL2B Leveling legs for
WS9** sleeves