10
User Options
Changing user options
Options such as single or double pad programming, beep volume, and
maximum cooking time can be changed to suit individual preferences.
To change options oven STANDBY must display:
1.
Press hidden pad.
• Pad is unmarked and located to the direct left of Preheat On/Off pad.
• Nothing will be displayed when hidden pad is pressed.
2.
Press Program Save pad.
• The first user option will display. Oven is now in options mode.
3.
Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.
4.
Press numeric pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
• To change additional options, repeat steps 3 and 4.
• Changes take affect after pad is pressed.
5.
Press Stop/Reset pad to return to STANDBY, or open and close oven door.
Numbered Pads
Display
Options (Factory Settings in Bold)
1
Double Digit Entry
Disabled
Enabled
Allows 10 (0-9) preprogrammed pads.
Allows 100 (00-99) preprogrammed pads.
2
Manual Programming
Disabled
Enabled
Manual time entry/cooking not allowed
Manual time entry/cooking allowed
3
Reset on Door Open
Disabled
Enabled
Opening oven door does not reset oven back to ready mode
Opening oven door resets the oven back to ready mode
4
Keybeep
OFF
ON
Keys do not beep when pressed (keybeep off)
Keys beep when pressed (keybeep on)
5
Speaker Volume
OFF
LOW
MEDIUM
HIGH
Keybeep volume OFF
Keybeep volume LOW
Keybeep volume MEDIUM
Keybeep volume HIGH
6
End of Cook Signal
Solid Beep
3 Second Beep
4 Beeps Once
4 Beeps Repeating
Food done signal is a continuous beep until reset by user
Food done signal is a three second beep
Food done signal is four beeps, continuously
Food done signal is four beeps, four times
7
Keypad Active
15 SECONDS
30 SECONDS
60 SECONDS
120 SECONDS
ALWAYS
Keypad time entry window is 15 seconds
Keypad time entry window is 30 seconds
Keypad time entry window is one minute
Keypad time entry window is two minutes
Keypad time entry window is always active
8
Preheat Warning
Disabled
Program Warning Only
Preheat Warning Only
Both
Both temperature warnings off
Warning only when preheat temperature does not match preprogrammed temperature
Warning only when actual oven cavity temperature is not to preheat temperature
Both temperature warnings on
TEMP PAD
Temperature Units
FAHRENHEIT
CELSIUS
Temperatures are displayed in °F for 60 Hz models
Temperatures are displayed in °C for 50 Hz models
STAGE PAD
Clean Filter Message
(Frequency)
Disabled
Weekly
Monthly
Quarterly
Oven will not display Clean Filter
Oven will display Clean Filter every seven (7) days
Oven will display Clean Filter every thirty (30) days
Oven will display Clean Filter every ninety (90) days
Didn’t like an option?
Factory settings are marked in bold. To
change the oven back to the factory
setting, simply select the option that is
marked in bold.
My changes weren’t
saved.
In order for any changes to be
saved, the Program Save pad must be
pressed after selecting an option.
Pressing the Stop/Reset pad will not
save changes.
?
