4
d. Unplug top hinge wire connectors. Do not remove
green ground wire from hinge. Remove top
hinges.
4. Level refrigerator and align doors.
a. Remove toe grille.
b. Turn roller adjustment screw to raise or lower
refrigerator cabinet until refrigerator is stable.
Some models have both front and rear adjustable
rollers.
c.
Models with Hinge Adjusting Cam
If tops of doors are not aligned, loosen refrigerator
door hinge screws 1/2 turn. Turn cam clockwise 1
increment at a time until doors are aligned. Open
and close doors. Tighten hinge screws.
5. Review “Installation Checklist” in
Owner’s Manual with consumer.
Front roller
adjustment screw
Hinge adjusting
cam (some
models)
Rear roller
adjustment screw
(some models)
Connecting Water Supply
WARNING
To avoid electrical shock which can cause severe
personal injury or death, disconnect power to
refrigerator before connecting water supply. After
connecting water supply, connect power.
Caution
To avoid property damage, observe the
following:
• Confirm water pressure to water valve is
between 20 and 100 pounds per square inch.
• Tighten adapter fitting and nut by hand to
avoid cross threading. Finish tightening nuts
with pliers and wrenches. Do not overtighten.
• Check for water leaks and correct if necessary
prior to returning refrigerator to normal
location and 24 hours after connecting.
Important
• Before connecting water supply, contact a plumber
to connect copper tubing to household plumbing in
compliance with local codes and ordinances.
• Amana Refrigeration Inc. recommends using a
saddle valve.
Do not use self-piercing valve.
Amana Refrigeration Inc. is not responsible for
property damage due to improper water connection.
Wire connectors
Green ground wire
Wire connectors
e. Remove doors.
Caution
To avoid property damage, protect soft vinyl
or other flooring with cardboard, rugs, or
other protective material when moving
refrigerator.
f. Slide appliance cart under side of refrigerator.
Wrap refrigerator with blanket or pad. Thread
cart strap around refrigerator and tighten. Do not
overtighten strap. Move refrigerator in front of
final location.
g. Rehang doors by reversing steps a-f. Use a
penny at top of doors to space doors 3/4” (18
mm) from cabinet.
2. Plug in power cord.
3. Move refrigerator into final location.
