Component Testing Procedures
!
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect power to oven before servicing, unless
testing requires it.
RT2310010 Rev. 1
May 2000
2
Illustration
Component
Test Procedure
Results
31823701
Oven light socket
Remove one wire from receptacle and
test resistance of terminals.
Measure voltage at oven light.
Indicates continuity with bulb screwed in.
120 VAC, see wiring diagram for terminal
identification.
If no voltage is present at oven light,
check wiring or light switches.
0301492
Rocker switch
Measure continuity of switch
positions:
Closed
Open
Continuity, if not replace.
Infinite, if not replace.
0304579
COM
NC
NO
Hi temperature
latch switch
Test for voltage at terminals to
chassis when in bake, broil, or clean
mode.
COM to chassis
Only when latch is engaged:
NO to chassis
120 VAC
120 VAC
31864501
P3
P4
P5
P6
Relays
P2
P1
1
12
1
Eaton electronic
range control
−
KRC
Measure voltage at terminals:
P3 (L1) and P4 (NEU)
Remove leads and measure for
continuity.
Drive requirements
Bake
Broil
Clean
Stage 1
Stage 2
Time
F2-Oven over temperature
F3-Open oven temperature sensor
F4-Shorted oven temperature sensor
FFF-Control failure
120 VAC should be indicated.
See schematic.
100% bake element
100% broil element
Time controlled 30 minutes 100% broil
100% bake
4 hours with last 30 minutes for cool
Verify voltage to clock.
If no voltage is present, check wiring.
If voltage is present, replace clock.
0314907
Temperature sensor
Measure resistances.
Approximately 1100
O
at room
temperature 75
º
F.
31940001 - Bake
31939901 - Broil
Ignitor
Test for voltage at terminals.
Test for the amount of amperage in
the circuit.
(Ignitor may glow but not have
sufficient amperage to open valve).
120 VAC
3.2
−
3.6 Amps, If not replace.
0316211
Bake burner
Verify gas is supplied.
Orifice adjusted for Natural or LP.
Check for obstructions or
contamination in ports.
0060691
Broil burner
Verify gas is supplied.
Proper orifice installed for Natural or
LP.
Check for damage to screen.
Replace if punctured or torn.