Product Dimensions
54.5”
(138.5cm)
45”
(114.3cm)
33.9”
(86cm)
26”
(66cm)
13.3”
(33.7cm)
20.6”
(52.4cm)
22.4”
(56.9cm)
Observe all governing codes and ordinances.
IMPORTANT:
This installation must conform with all local codes and ordinances. In the absence of local codes,
installation must conform with American National Standards Institute, National Fuel Gas Code ANSI Z223.1 -
latest edition or CAN/CGA B149.1 - latest edition.
IMPORTANT:
Grill must be connected to a regulated gas supply. Refer to the model/serial rating plate for in-
formation on the type of gas that can be used. If this information does not agree with the type of gas available,
check with your local gas supplier.
The model/serial number rating plate is located on the cart base. See the top illustration.
A
A. Model/serial number plate
Gas Pressure Regulator
The gas pressure regulator supplied with this grill must be used. The inlet (supply) pressure to the
regulator should be as follows for proper operation:
LP Gas:
Operating pressure: 11" (27.9 cm) WCP
Inlet (supply) pressure: 11" to 14" (27.9 cm to 35.5 cm) WCP Contact local gas supplier if you are
not sure about the inlet (supply) pressure.
Gas Supply Requirements
25
INSTALLATION REQUIREMENTS
Burner Requirements for High Altitude
Input ratings shown on the model/serial rating plate are for elevations up to 2,000 ft (609.6 m).
For elevations above 2,000 ft (609.6 m), ratings are reduced at a rate of 4% for each 1,000 ft (304.8
m) above sea level. Orifice conversion is required. See “Assistance or Service” section to order.
