12
Operation
Coil Modules
WARNING
!
To avoid risk of serious personal injury, property
damage, or fire, do not leave surface elements
unattended while in operation. Grease and spillovers
can ignite causing a fire.
1.
Push in and turn surface element control to desired
setting.
• Cooktop has 1 indicator light for all control knobs.
When an element is on, indicator light glows red.
• Surface element control does not stop at each
setting. See settings below.
LO—Use to prepare food at less than boiling
temperatures or to simmer.
2 through 6—Use to maintain boiling of larger
amounts of food, low temperature frying and to
maintain correct pressure in a pressure cooker.
HI—Use to bring food to boiling temperatures. When
food is boiling, temperature setting should be
reduced.
2.
When finished cooking, turn control to
OFF.
HI
OFF
SI
M
2
3
4
5
6
Surface element control knob
• To remove grille module turn all controls to
OFF,
allow to cool, and reverse steps above.
Installing Griddle
1.
Turn all controls to
OFF.
2.
Install module pan, grease shield and griddle element
according to “Installing Smoke Control Grill™
Module” section.
3.
With grease trap toward rear of cooktop, place griddle
pan over of element.
• To remove griddle module turn all controls to
OFF
and reverse steps above.
Grease
trap
