13
RS2220002 Rev. 0
Programming
What is stage
cooking?
Stage cooking enables
several different cooking cycles, or
stages, to be used consecutively
without repeated input from the user.
Stage cooking can be set to to
defrost food initially, then cook it,
and then keep the food warm until
serving time.
STAGE
Programming Preheat
Setting
The convection temperature setting
can be set between 150°F to 475°F.
It is recommended to set the
preheat setting to the most
commonly used temperature for
that oven. The factory default
preheat setting is 450°F.
To program the preheat setting:
1. Press PREHEAT ON/OFF pad.
2. Press PROGRAM SAVE pad.
3. Press TEMP pad.
4. Enter desired temperature by
using the numeric key pads.
5. Preheat temperature is
changed.
Programming Multiple Stages
Stage cooking allows consecutive cooking cycles without interruption.
Up to four different cooking cycles can be programmed into a memory
pad.
To use stage cooking:
1. Follow steps 1 through 6 above.
7. Press STAGE.
• This will begin programming for the next cooking
stage.
• Display indicates stage to be programmed.
• Enter cook time, temp and power level as in steps 4. 5 and 6.
• To enter another cooking stage for that pad, press
STAGE pad again.
• Up to four different stages can be programmed.
8. Press PROGRAM SAVE to save the program and
changes.
9. To discard changes, press STOP/RESET before pressing
PROGRAM SAVE.
STAGE
PROGRAM
SAVE
Programming Pads
Oven is shipped from the factory for single pad programming. To change
the oven default to double pad programming, see
User Option section. To
program the amount of time, power level, or temperature setting for a pad.
1. Oven must be ON.
• Press PREHEAT ON/OFF.
• ITEM must flash in display.
2. Press PROGRAM SAVE.
• Programming mode begins.
• PROG displays.
• Oven is in programming mode.
3. Press pad to be programmed or reprogrammed.
• Display will change to review all settings for the pad.
• The pad number that is being programmed displays
below the word ITEM.
4. Press TIME to program amount of cooking time.
• Enter desired cooking time by using numeric key
pads.
5. Press TEMP pad to program the cooking temperature.
• Enter desired convection temperature by using
numeric pads.
6. Press POWER LEVEL to program level of microwave
power.
• Press POWER LEVEL again to set to H (High).
• For a lower microwave power, press pads 1 (for 10%)
through 9 (for 90%). 0 turns off the microwave
power and cooking is by convection only.
7. Press PROGRAM SAVE to save the program changes.
8. To discard changes, press STOP/RESET.
PROGRAM
SAVE
PROGRAM
SAVE
TIME
TEMP
POWER
LEVEL
PREHEAT
ON / OFF
Example of Stage Cooking Conditions
Stage 1
Stage 2
Stage 3
Temp
450°F
450°F
450°F
Power
H (high)
3
0
Time
2:30
1:30
1:30
