Amana ABB2522FEB11 Скачать руководство пользователя страница 14

14

Water Filtration System 

The water filter is located in the upper right-hand corner of the 
refrigerator compartment. You should change the water filter at 
least every 6 months. If the water flow to the water dispenser or 
ice maker decreases noticeably before 6 months have passed, 
replace the water filter more often.

Replacing the Water Filter

To purchase a replacement water filter, model UFK8001AXX-750, 
contact your dealer or call 1-877-232-6771 U.S.A. or
 1-800-807-6777 Canada.

IMPORTANT: Air trapped in the water system may cause water 
and filter to eject. Always dispense water for at least 2 minutes 
before removing the filter or blue bypass cap. 

1. Turn filter counterclockwise to remove.

2. Remove sealing label from replacement filter and insert the 

filter end into the filter head.

3. Turn the filter clockwise until it stops. Snap the filter cover 

closed.

NOTE: The dispenser feature may be used without a water filter 
installed. Your water will not be filtered. If this option is chosen, 
replace the filter with the blue bypass cap.

REFRIGERATOR CARE

Cleaning

Both the refrigerator and freezer sections defrost automatically. 
However, clean both sections about once a month to avoid 
buildup of odors. Wipe up spills immediately.

IMPORTANT: Because air circulates between both sections, any 
odors formed in one section will transfer to the other. You must 
thoroughly clean both sections to eliminate odors. To avoid odor 
transfer and drying out of food, wrap or cover foods tightly.

To Clean Your Refrigerator:

NOTE: Do not use abrasive or harsh cleaners such as window 
sprays, scouring cleansers, flammable fluids, cleaning waxes, 
concentrated detergents, bleaches or cleansers containing 
petroleum products on plastic parts, interior and door liners or 
gaskets. Do not use paper towels, scouring pads, or other harsh 
cleaning tools.

1. Unplug refrigerator or disconnect power.

2. Hand wash, rinse, and dry removable parts and interior 

surfaces thoroughly. Use a clean sponge or soft cloth and a 
mild detergent in warm water. 

3. Wash stainless steel and painted metal exteriors with a clean 

sponge or soft cloth and a mild detergent in warm water. 

To keep your stainless steel refrigerator looking like new 
and to remove minor scuffs or marks, it is suggested that 
you use the manufacturer’s approved Stainless Steel 
Cleaner & Polish, Part Number 20000008. To order the 
cleaner, call 1-877-232-6771 U.S.A. or 1-800-807-6777 
Canada.

IMPORTANT: This cleaner is for stainless steel parts only!

Do not allow the Stainless Steel Cleaner & Polish to come into 
contact with any plastic parts such as the trim pieces, 
dispenser covers or door gaskets. If unintentional contact 
does occur, clean plastic part with a sponge and mild 
detergent in warm water. Dry thoroughly with a soft cloth.

4. There is no need for routine condenser cleaning in normal 

home operating environments. If the environment is 
particularly greasy or dusty, or there is significant pet traffic in 
the home, the condenser should be cleaned every 2 to 
3 months to ensure maximum efficiency.

If you need to clean the condenser:

Remove the base grille.

Use a vacuum cleaner with a soft brush to clean the grille, 
the open areas behind the grille and the front surface area 
of the condenser.

Replace the base grille when finished.

5. Plug in refrigerator or reconnect power.

Changing the Light Bulb

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to 
replace the bulb with an appliance bulb of the same size, shape, 
and wattage (no greater than 40 watts).

1. Unplug the refrigerator or disconnect power.

2. Remove the light shield, if necessary.

Freezer drawer models 

Top of the refrigerator compartment - Slide the light shield 
toward the back of the compartment to release it from the 
light assembly.

Top of freezer compartment - The light shield opens from 
the back. Firmly press forward on the notches in the back 
of the shield and pull the shield down.

NOTE: You may need to remove the upper freezer shelf or 
basket to access the light assembly. 

Freezer door models

Top of the refrigerator compartment - Slide the shield 
toward the back to release it from the light assembly.

Top of freezer compartment - Squeeze and pull rear of 
light shield toward you to release the tabs, then pull 
down. 

Do not use with water that is microbiologically unsafe or 
of unknown quality without adequate disinfection before 
or after the system. Systems certified for cyst reduction 
may be used on disinfected waters that may contain 
filterable cysts.

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Содержание ABB2522FEB11









































Отзывы: