Congratulations on your purchase of
the Amaircare® XR-100 portable air
filtration system. With proper care and
maintenance, your XR-100 will provide
many years of reliable service.
Installation
The XR-100 mounts to
your vehicle’s head rest
as shown.
1. Raise the head rest to
its maximum height.
2. Position the unit against the
back of the head rest with the receptacle
at the bottom and the screen facing out.
3. Wrap the strap around the supports of the head rest
and through the buckle. Pull on the strap to tighten it.
4. Lower the head rest. The unit should be firmly
secured to the head rest. If it is loose adjust the strap
until it is secure.
5.Insert the small plug of the adapter cord into the
receptacle on the bottom of the unit. Plug the other
end into your vehicle’s cigarette lighter. The unit
comes on when you plug it in. Unplug the unit when
not operating the vehicle.
Cleaning your XR-100
Use a soft, damp cloth to wipe down the motor/fan
housing. You can also use a non-abrasive cleaner. The
filter cartridge can be disassembled and the compo-
nents cleaned with a mild detergent and warm water.
Do not let water get into the filters themselves or the
motor/fan housing.
Filter pack
replacement
instructions
1. Unplug the unit to turn it off. You
may wish to remove the unit from
your car seat by undoing the
mounting strap.
2. Remove the filter cartridge by
rotating it counter-clockwise. The
cartridge requires only a partial
rotation to dislodge from the
motor/fan housing.
3. Remove the four screws on the
underside of the filter cartridge to
separate the screen covering from
the filter container.
4. Remove the old filters and care-
fully discard them. Do not shake the
filters as this can cause trapped par-
ticles to fall out. You may wish to
clean the screen covering and filter
container with soap and warm
water.
5. Remove the new filter-pack from
the packaging, keeping the individ-
ual filters in the order they came in.
Place the new filter-pack into the fil-
ter container with the black filter on
top.
6. Reassemble the filter cartridge
and replace it on the motor/fan
housing.
7. If you removed the unit from your
car seat, reinstall it with the mount-
ing strap, pulling the strap tightly so
the unit mounts firmly to the seat.
8. Plug the XR-100 into your vehicle's
cigarette lighter, or plug it into a
wall receptacle with the supplied
12V DC adapter if you wish to use
the XR-100 in your home, office or
hotel room.
NOTE: Do not attempt to vacuum or
shake-out the filters to remove dirt,
as this can damage the filters. Filters
are disposable items and should be
changed regularly to ensure the unit
works properly.
Replace the filter-pack
every 4 to 6 months.
