3.5.2 eSATA HOST LED
The AES-3502UE has one Green color eSATA Host LED. The table shows eSATA Host LED function
and operation.
DESCRIPTION
GREEN LED
eSATA Host Unplugged / No Power
Off
eSATA Host Unplugged (Idle)
On
eSATA Host Unplugged (Active)
On
3.5.3 USB HOST LED
The AES-3502UE has one Green color USB Host LED. These LEDs behave as follows:
DESCRIPTION
GREEN LED
USB Host Unplugged / No Power
Off
USB Host Unplugged (Idle)
On
USB Host Unplugged (Active)
On
3.5.4 SYSTEM ALARM LED
The AES-3502UE has one Red color System Alarm LED. These LEDs behave as follows:
DESCRIPTION
RED LED
Normal State
Off
Error State (One or More Bad Partial Volumes on Mirroring Mode only)
On
3.5.5 HDD LEDs
The AES-3502UE has two HDD LEDs (Green and Red). The table shows HDD LED function and
operation. These LEDs behave as follows:
DESCRIPTION
GREEN LED
RED LED
HDD Unplugged / No Power /
Off
Off
HDD plugged (Idle)
On
Off
HDD plugged (Active)
On
Blink (On)
HDD Rebuild (A Physical Partition is being Rebuild; i.e. Mirroring Mode)
On
Blink (On)
Will appear
as On
Error State (One or More Bad Partial Volumes)
Off
Off
3.6 MODE SETTING
The AES-3502UE with the device’s LEDs to indicate status. To select a storage policy in this mode the first
time that a new factory-shipped product is used, ensure that the hard disk drives are installed; turn on the power
before set the DIP switch on the back of the AES-3502UE to the desired Storage Policy. To change the
storage
policy thereafter, set the DIP switch to the desired position and press the recessed Mode Change push-button to
create the new virtual volume(s). Creating new virtual volumes will destroy any existing data that existed on the
previous volume, but expanding an existing COMBINE (BIG) volume will not destroy any existing data.
Ver. 071004
AES-3502UE User’s Manual
28
