User Manual
User Manual
3
8
Chapter 2. Included fittings
Chapter 6. Setup introduction
debugging
Power on/off keystroke
Press on-off keystroke of power supply after installation.
Automatically identify signal input and output after turn on switch if it is only I
channel signal input.If many channels signal input at the same time.The switch
will acquiescence the output port as minimum(CH1<CH2<CH3).Also you can
pressCH1/CH2/CH3 keystroke to switch signal source.
Setup the output signal of peripheral equipments and the input signal of display as
HDMI format.(Please consult the equipment manual to setup the signal of perip
heral equipments is HDMI format.)
Press SEARCH keystroke to search Please freeze frame the menu when you get
the HDMI signal then press NEXT keystroke to search again. Also you can press
CH1/CH2/CH3keystroke to switch the signal source. Press CLOSE keystroke to
close HDMI signal output.
Controller 1pc
5v/1A power supply 1pc
Manual 1pc
Warranty card 1pc
4
