English
GB-4
Pairing with Bluetooth enabled devices
(Mobile phones/Tablets etc.)
1. Keep the speaker and device within 1 meter of each other.
2. Hold down the power button for 2-3 seconds to turn on the
speaker, the LED indicator will blink quickly in blue and red
while the speaker enters search mode.
3. Start the Bluetooth function on your mobile device and look
for “AMADEUS LONGA” in the Bluetooth device list (depending
on the Bluetooth version of your device you may have to enter
pass code ‘0000’).
4. After successfully connecting, the LED will change to solid blue.
Note:
1. If the pairing was not successful, turn off the speaker and
re-pair again.
2. After successful pairing, paired devices will remember each
other so there is no need to pair again unless pairing information
is deleted.
3. To pair with a new device, just follow steps 1-4 above after
UN-pairing the existing device.
Re-connecting to a paired device
If the speaker does not connect to the last used device
automatically, then you will need to select it manually from the
list of devices on your mobile device.
