Amada MD-A8000B-05 Series, Руководство по эксплуатации

Страница: 51 / 95

MD Series
7. Basic Operation
7-1
→
In most cases, AUTO should be used.
→
Set the nearest value above the welding current.
→
Select 2-step for welding.
→
Combination control of constant-current and constant-voltage.
→
Set 10 ms because of the sequencer (PLC) connection.
→
Set for operation only during input of the start signal.
→
Select the schedule with a parity from the sequencer.
→
Set the end signal output to 10 ms.
→
In most cases, it should be used as it is.
7. Basic Operation
The operation method for MD-A8000B is given here as an example.
The settings to be made are as follows:
Schedule No.: #15
Welding sequence: 2-step
Precheck function: ON
Welding method:
COMB.
Monitor values: average current and average voltage
Change these settings to suit your purpose of use.
①
Refer to 5. Connection , and connect peripheral equipment correctly to MD-A8000B .
②
Turn the POWER switch on and press the MENU key.
Check that the display screen and lamps are turned on normally
and the fan motor is operated.
③
Select STATUS by the cursor keys (  ) and
press the ENTER key.
④ Set functions on the STATUS screen.
Move the cursor to the desired item and select
the function by the + and - keys.
Press the ENTER key, and the selected
function is valid.
⑤ Move the cursor to NEXT and press the ENTER key. The second screen appears.
CAUTION