Amada 4840, Руководство по эксплуатации, Страница: 10 / 16

BW SERIES WORKSTATION MODEL 4840
2 990-512
Rear Panel Components
Exhaust Covers
Remove the two covers to ports for exhausting gases from the enclosure
interior.
Fiber Optic Cable
Entry Port Grommet
These ports provide entry for up to eight fiber optic cables.
WARNING: Once a grommet has had a hole punched through it for a fiber
optic cable, if that cable is later removed, you could be exposed to dangerous
laser radiation escaping through that hole.
Replace the grommet with a new
grommet
Interlock Switch Cable
Strain Relief
Entry port for the interlock switch cable. Refer to the schematic in Figure 3.
Wire the four interlock switches in series with the cable provided. Route,
dress and secure the cable with the cable clamps provided.
Power Input Cable
Strain Relief
Exit port for the power bar cable
Cover Gas Input
This port used for cover gas required applications. Use ¼” OD tube.
Video Output
Dual BNC connector used for connecting CCTV focus heads to external cross-
hair generators.