6
overwritten. Under video mode, short press on【Menu button】to lock the video file.
6
6
6
6）
）
）
）Parking monitor:
Parking monitor:
Parking monitor:
Parking monitor:
When the camera is off, if the lens detects any movement, the camera will
begin recording automatically. The video footage is then saved and locked. If there is no
movement within a further 10 seconds, the camera will stop recording.
7
7
7
7）
）
）
）Cycle recording:
Cycle recording:
Cycle recording:
Cycle recording:
The oldest video footage will be overwritten by newer files. Cycle recording
setup can be done from the video mode menu.
There are six options: Off /1 minute/2 minutes/ 3 minutes/5 minutes/10 minutes.
8) Audio recording while video is recorded:
8) Audio recording while video is recorded:
8) Audio recording while video is recorded:
8) Audio recording while video is recorded:
Audio on/off
9) Date and time setup:
9) Date and time setup:
9) Date and time setup:
9) Date and time setup:
Under standby mode, short press on【Menu button】to enter system
setup menu, short press the 【Page up button】or【Page down button】to move the cursor to
date setup options. Short press the【Enter button】to enter menu setup.
Remarks: Please make sure the correct date and time is set up so as to ensure valid video
footage as evidence in case of accident.
10
10
10
10）
）
）
）USB mode:
USB mode:
USB mode:
USB mode:
Connects the camera to a PC via the USB cable. Two modes will be shown on
screen, USB and camera. Short press on【Page up button】or【Page down button】to select
USB option, then short press on【Enter button】to enter USB mode.
11
11
11
11）
）
）
）Charging the batte
Charging the batte
Charging the batte
Charging the battery:
ry:
ry:
ry:
Plug in the power cable, and the red indicator light will be on, indicating
the battery is charging. The red light dims as battery charges up. When fully charged the red
light will turn off.
12
12
12
12）
）
）
）Screen off delay:
Screen off delay:
Screen off delay:
Screen off delay:
The screen can be turned off automatically. In the menu select “Screen off
timing”. There are four options are available: Off/3 minutes/5 minutes/10 minutes. For example,
“3 minutes” option would mean dash cam goes to power saving mode after dash cam is turned
on for 3 minutes and then screen is off. Default setting is “Off”.
