17
(5) Installing Control System: Preparation, Installation and
Test
Required Components: Controller Box, Level, Electrical Driller, Multimeter
Installing Steps: (1) Use key to open control system, install assembled components, fix control system on the wall, use level
to measure levelness, mark the hole positions, use driller to make holes.
(2) Fix control system on the wall, cables shall be stripped and connected to control system, and connect
cables to control system according to corresponding circuit colors.
(3) Use Multimeter to measure after finish, turn on circuit breaker and power it on, turn on fan for test,
counterclockwise rotation direction is forward direction. Test fan for 15 minutes to observe whether the
sound of product is normal, confirm whether current is within rated range, and confirm the distance
between fan and obstruction when fan is running, in order to guarantee the safe distance when fan is
running (30cm to end of fan blade, 1m from left to right).
Attention: Reference the Instruction for connection methods under different circumstances.
Содержание AH-5
Страница 1: ......
