1.
Take sails, boat and stand out of the box. Place the hull
on stand (with deeper groove in stand facing aft).
2.
Remove wrapping from sails and gently unroll.
Note:
Take care when untying bundle of rigging lines, so
as not to tangle.
Bowsprit
3.
Pull Bowsprit out from Bow, placing end notch up against
line attached to deck to hold in place. Hook line from
hull front to eyelet (E1) on Bowsprit underside.
Mast and Boom
4.
Insert Mast into Mast Step with Boom pointing toward
Stern.
5.
Hook end of line from blocks on aft deck to eyelet (E2)
on Boom underside.
Gaff Sail
6.
Raise Gaff Sail and insert gooseneck pin on top spar
into eyelet (E3) at Mast top. Hook line from bottom
corner of Gaff Sail to eyelet (E4) on starboard deck
near Mast Step.
Shrouds and Stays
7.
Find set of Shroud lines attached to port side Mast
and matching unattached set of Shroud lines
(which has a pair of lines with hooks at ends
that hangs from a central hook). Hang
unattached Shroud lines from starbard side
Mast eyelet (E5), and hook ends to deck
eyelets (E6, E7). Hook ends of attached
port side Shrouds to deck eyelets (E8,
E9).
Note:
Use sliding adjusters on lines
to tighten rigging where needed.
8.
Hook ends of stay lines from top
of Mast to aft deck eyelets
(E10, E11).
9.
Hook ends of lines from
mid-Mast to deck eyelets
(E12, E13).
Main Sail
10.
Hook lines
coming from
blocks hanging
from each side of upper
Main Sail spar to deck eyelets (E14, E15).
11.
Hook ends of lines attached to the tip of the Main Sail
upper spar to aft deck eyelets (E16, E17).
12.
Find the zigzag line supporting the Mail Sail upper spar,
and hook top end of line to eyelet (E18) on Mast.
13.
Carefully work the zigzag lines, pulling
line taunt between
blocks until the
end of the line can
hook to starboard
deck eyelet (E19) next
to Mast Step.
1st Jib Sail
14.
Raise 1st Jib by pulling end of line coming from blocks at top of
sail, hooking end to starboard deck eyelet (E20) near Mast Step.
(Hook top corner of 1st Jib, if not already attached, to Mast eyelet.)
15.
Hook fore corner of 1st Jib to Bowsprit eyelet (E21) and end of
line at forward edge of 1st Jib to same eyelet (E21).
16.
Hook ends of lines from 1st Jib aft corner
to deck eyelets (E22, E23).
2nd Jib Sail
17.
Hook forward corner of 2nd Jib
to Bowsprit eyelet (E24).
(Hook top corner of
2nd Jib, if not already
attached, to Mast eyelet.)
18.
Hook aft corner to deck
eyelet (E25).
3rd Jib Sail
19.
Hook line at fore
corner of 3rd Jib to
Bowsprit eyelet (E26).
(Hook top corner of
3rd Jib, if not
already attached,
to Mast eyelet.)
20.
Hook line at
lower aft
corner to
deck
eyelet
(E15).
Mast
Gaff Sail
Mast
Step
1st Jib
2nd Jib
3rd Jib
Bowsprit
Boom
Main Sail
Bow
(fore)
Stern
(aft)
E1
E1
E26
E26
E24
E24
E24
E21
E21
E21
E21
E25
E25
E25
E9 E8 E12 E22
E14
E10
E10
E16
E10
E16
E16
E2
E2
E17
E17
E11
E11
E15
E15
E14
E22
E23
E3
E18
E3
E18
E5
E5
E12
E8
E9
E17
E11
E15
E7
E20 E19
E19 E4
E4
E6 E13 E23
Starboard
Port
ShroudsShrouds
08
/08 83000012
AS076F Instructions
The Netherlands
AM
NL
Ambachtsweg 37
NL-3899 AM
Zeewolde
United States
AM
USA
888 Garfield
P.O. Box 21710
Eugene, OR 97402
