ALZRC Mr.Q-190, Инструкция по эксплуатации

Страница: 6 / 13

碳纤底板
Carbon Fiber Base Plate
1
. 2mm
碳纤机臂
Carbon Fiber Motor Arm
2
. 5mm
飞控板
Autopilot Plate
电调板
ESC Plate
双面胶
Double Tape
注意：
飞控箭头代表机头方向。
Note: The arrow facing the
front.
2mm
电调板 / 飞控板安装在机架内部
与侧板及机身柱间隙为 2mm
ESC Plate & Autopilot Plate install inside
the frame and remain 2mm distance with
the Side plate and fuselage pillar.
2mm
5
碳纤机臂
Carbon Fiber Motor Arm
2
. 5mm
组装说明 ASSEMBLY SECTION
注意：螺丝平头面为底面。
Note: Flat side of the screw is the bottom side.
碳纤机臂 / 底板
Carbon Fiber Motor Arm/Base Plate
Chapter 3
第 1 步组装完成
Assembled in Chapter 1
第 2 步组装完成
Assembled in Chapter 2
螺丝垫片-红
Screw Washer - Red
M2
. 5
圆头内六角螺丝
Socket Button Head Screw
M2.5x8mm
24
3
圆头内六角螺丝
Socket Button Head Screw
M2.5x8mm
24
3
螺丝垫片-红
Screw Washer - Red
M2
. 5
飞控板 / 电调板
Autopilot Plate/ESC Plate
Chapter 4
第 3 步组装完成
Assembled in Chapter 3
出厂零件包装如果是已组装品，请务必确认各部件是否
锁紧上胶。
For original manufactory package, If the product is
already assembled by factory, please check again if
parts are firmly secured and applied with some glue.
出厂零件包装如果是已组装品，请务必确认各部件是否
锁紧上胶。
For original manufactory package, If the product is
already assembled by factory, please check again if
parts are firmly secured and applied with some glue.