ALZRC DEVIL X360, Инструкция по эксплуатации, Страница: 8 / 38

7
组装说明 ASSEMBLY SECTION
碳纤机身侧板-中型舵机
Carbon Fiber Main Frame
Chapter 7
DX360-A
第 6 步组装完成
Assembled in Chapter 6
碳纤机身侧板-中型舵机
Carbon Fiber Main Frame
Medium Servo
1.2mm
碳纤配件的制造工艺会导致边缘非常锋利，为了
不损伤电缆，我们建议用砂纸打磨边缘。
The manufacturing process of the carbon fiber
parts often leaves micro-burrs edges. We
recommend de-burring the edges with sand
paper to minimized the risks of cable cuts.
圆头内六角自攻螺丝
Socket Head Tapping Screw
M2x8mm
圆头内六角自攻螺丝
Socket Head Tapping Screw
M2x8mm
第三主轴轴承座
Main Shaft Third Bearing Mount
Chapter 8
圆头内六角自攻螺丝
Socket Head Tapping Screw
M2x8mm
轴承
Bearing
Φ 6xΦ13x5mm
第三主轴轴承座
Main Shaft Third Bearing Mount
第 7 步组装完成
Assembled in Chapter 7
第三主轴轴承座固定螺丝需在完成齿轮组安装以
及调整好高度后方可拧紧。。
Do not tighten the screws of the third bearing
mount before complete assembly and adjust
the height of the main gear.
DX360-B
DX360-A
螺丝锁入塑胶零件请勿过度拧紧。
Do not over-tighten the screws
into the plastic parts.