8
ENGLISH
Device charging
You can charge your device using the USB-A output ports or the USB-C port.
• Plug one end of the power cable into the USB power port of your device and connect the
other end to the power bank's output port.
• Press the charge status check button to start charging.
• Depending on the charge status of the power bank, the corresponding number of LED
indicators will light up. As the connected device charges, the power bank's LED indica-
tors will gradually turn off. When all LED indicators go out, the power bank is completely
discharged.
TROUBLESHOOTING
PROBLEM
PROPOSED SOLUTION
The power bank won't turn on.
Plug the power bank into the mains and it should turn
on within 2 to 3 minutes.
The power bank is not
charging.
Make sure the power cable is properly connected to
the power bank port and the device being charged.
INSTRUCTIONS
Содержание APW-PBM40PD100
