3
Installation instructions
Fixing to brick:
Mark holes, drill 4 x 6mm holes, insert wall plugs.
Insert screws into back panel & screw into wall plugs.
Fixing to timber fence:
Mark holes, drill 4 x 2mm pilot holes.
Insert screws into back panel & screw into wall plugs.
How to set your opening combination
You can set your own personal combination by following these instructions:
The opening combination is pre-set at 0-0-0.
1. Turn the dials to the pre-set combination 0-0-0.
2. Move the reset button to position B. The reset button is inside, on the back of the lock
mechanism.
3. Turn the dials to set your desired combination, and write down immediately, so you
do not forget.
4. Move the reset button back to position A. The lock will now open to your own
combination.
The reset button is inside, on the back of the lock mechanism.
Normal position
of RESET button
Position of RESET
button prepared
for your setting
opening
combination
