ALZA CM-PJ-T-W, Руководство пользователя

Страница: 4 / 17

Installation
Note: Please, fix the installing bracket onto the wall or ceiling
according to the conditions. Joining the brackets and rail, the motor
should be installed close to the power supply.
Programming
1. Press the learn key on the motor for 3 seconds, LED blinks
2. Press the “C” button on the remote control within 8 seconds,
LED blinks, then finishes
Limit Setting
When the CM-PJ-T -W motor is installed for the first time, the
following limit setting operation is required.
1. Press the “L” button on the remote
2. Loosen the button
The limit was cleared successfully.
Setting the direction limit
CLOSE: Press the “up” button on the remote or pull the curtain by
hand.
The motor runs in the closed direction. After the curtain is closed, it
turns to stop automatically and the motor LED flashes. The limit
setting of the closed direction is completed.
OPEN: Press the “down” button on the remote or pull the curtain by
hand.