Always “On” UPS Systems Inc.
M0102_V_Series_801-222V_Manual V2.3 2012-06-12
9
4.6.
Shutdown Mode
In shutdown mode the UPS stops supplying power to the load and waits for
the return of utility power. If there is no utility power present, external devices
(e.g., servers) connected to the computer interface can command the UPS to
shutdown. This is normally done to preserve battery capacity after the graceful
shutdown of protected servers.
4.7.
Green Function
In order to conserve battery power when in backup mode the UPS will
automatically shutdown after 5 minutes if the connected loads are operating at
less than 20 watts.
To disable “GREEN FUNCTION” press and hold the “On” button during
initial start-up for at least 3 seconds until a beep-beep sound is heard.
