LP9 Suspended Installation Guide
8 of 11
102-000026 - IG090320-A.0
Installation: Connecting Multiple
Sections (Cont.)
Tighten joiner screws, as shown, using a 1/8” Hex Key.
Ensure each section is properly aligned, and that there
are no gaps between sections
17
Mitered Corners: Tighten Joiner Screws
Align sections and join, as shown.
CAUTION:
Take care not
to pinch wires.
16
Mitered Corners: Align & Join Sections
Re-install each metal cover.
CAUTION:
Do not pinch wires
while reattaching!
19
Re-install Cover
Tighten joiner screws, as shown, using a 5/64” Hex Key.
Ensure each section is properly aligned, and that there
are no gaps between sections..
15
Tighten Joiner Screws
Adjust Down-Light aiming, parallel and perpendicular
direction are available, as shown.
20
Downlight direction.
Connect wiring quick-connects between sections. Match
each color, as shown.
NOTE:
Color combinations may
vary.
18
Connect Wiring Between Sections
SHOCK HAZARD! May result in serious injury or death.
Turn
power OFF at circuit breaker prior to installation or servicing.
