TT499 Drawing Table “Caddy”
Assembly Instructions
ALVIN & CO., INC.
Bloomfield, CT • Grand Prairie, TX
www.alvinco.com
HARDWARE LIST
Key Qty. Description
A
1
Back Support Bracket (
Thinner
)
B
1
Front Support Bracket (
Thicker
)
C
1
Bolt for Tray Support (
3/4"
)
D
3
Bolts for Tray Support (
1/2"
)
E
4
Nuts
F
4
5/8" Mounting Screws
A
NOV 2004
A
B
C
D
E
F
B
D
E
C
F
E
F
No. TT499-1 White • No. TT499-2 Black
1.
The instrument tray is reversible. It can be
mounted to the left or right side of
your table.
2.
Attach tray support brackets (
A
&
B
) to
the instrument tray using bolts (
C
&
D
)
and nuts (
E
). Please note that the thicker
bracket (
B
) attaches to the front of the
tray and the thinner bracket (
A
) attaches
to the back. Please also note the proper
position for the longer bolt (
C
).
3.
Position the assembled tray against the
left or right side of your table top and
mark the locations of the 4 mounting
screws on the underside of the table.
Pre-drill or pre-punch holes as desired.
4.
Attach brackets to the underside of the
table top with the 4 mounting screws (
F
).
Front
Back
