ALVEO3D PrintBOX-440, Инструкция по эксплуатации

Страница: 12 / 20

11
The filtering system can be controlled by the V2 board provided pre-assembled.
It is necessary to have the high-pressure ALHP2425-H8 fan to run the board V2.
STEP 8 . OPTION V2
Unscrew the black
countersunk screw M3 and
gently pull the AlveoV0
cover to take it off.
Plug the wire to the board
AlveoV0, then replace the
cover back, let the wire go
through the small opening,
do not pinch it when
tightening the screw.
1.
2.
https://www.alveo3d.com/en/product/high-pressure-fan/
If you order the board V2 and the high-pressure H8 fan independently of the
enclosure 3D printer - BOX (PrintBOX). It is necessary to replace the provided
fan ALHP2425-H6 provided with the PrintBOX by the fan ALHP2425-H8 (keep
the label towards the filter).