Alvarion BreezeMAX Si 4000 CPE, Руководство пользователя

Страница: 72 / 135

Chapter 5 - Configuring WiFi Parameters WiFi Configuration
BreezeMAX Si 4000 CPE 56 User Manual

Network Name (SSID) – The Service Set ID (SSID) that identifies the Wi-Fi
network. The SSID is case sensitive and can consist of up to 32 alphanumeric
characters. (Default: WiMAXCPE)

Radio Channel – The radio channel used by the unit and its clients to
communicate with each other. This channel must be the same on the unit and
all of its wireless clients. The available channel settings are limited by local
regulations. (Default: 1; Range: 1-14, Auto; Default for EU P/N: Auto).

Working mode - The 802.1x authentication is an addition to the WLAN
security methods. It provides a method to protect the network behind the
access point from intruders as well as provide dynamic keys and strengthen
WLAN encryption. (Range: 802.11b, 802.11g, 802.11b/g, Default:802.11b/g)

Transmit Power – The power of the radio signals transmitted from the unit.
The higher the transmission power, the farther the transmission range. Only
Full power is available.

RTS Threshold – Sets the packet size threshold at which a Request to Send
(RTS) signal must be sent to a receiving station prior to sending the data
frame. The unit sends RTS frames to a receiving station to negotiate the
sending of a data frame. After receiving an RTS frame, the station sends a CTS
(clear to send) frame to notify the unit that it can start sending data. If a
packet size equals or exceeds the RTS threshold, the RTS/CTS (Request to
Send/Clear to Send) mechanism will be enabled. Units contending for the
medium may not be aware of each other, and the RTS/CTS mechanism can
solve this “Hidden Node Problem.” (Range: 256-2432 bytes: Default: 2432
bytes).

CTS Protect Mode – When 802.11g and 802.11b clients operate together in
the same Wi-Fi network, there needs to be a mechanism that prevents
802.11b clients from interfering with 802.11g transmissions. This is achieved
by sending 802.11b-compatible CTS (Clear to Send) or RTS/CTS (Request to
Send / Clear to Send) frames before each transmission. This mechanism
NOTE
If you experience poor performance, you may be encountering interference from another wireless
device. Try changing the channel, as this may eliminate interference and increase performance.