Alvarion BreezeACCESS II CX, Системное руководство

Страница: 42 / 78

Chapter 2 - Installation
1. Verify that the o-ring supplied with the cable kit is in place.
2. Connect the RJ-45 connector of the Ethernet cable to the outdoor
unit.
Attach the service box to the unit. Tighten the top nut.
1. Connect one end of the coaxial RF cable to the RF connector on the
. Connect the other end of the RF cable to the antenna.
The RF connectors should be sealed properly to protect against rain
Installing the AU’s Antenna
Loc t least 20 cm (8 in.) away from the SU’s
ructions
included in the antenna kit. Use only the antennas stated in Tables 2-2,
3.
4. Route the cable to the location selected for the Interface Unit.
top panel of the unit.
2
3.
and moisture
ate the AU’s antenna a
antenna or any other antenna. Refer to the installation inst
2-3 and 2-5.
NOTE Applicable to systems with a 900 MHz AU
Verify that you use the correct polarization according to the results of the spectrum
analysis survey.
WARNING
ONLY experienced installation professionals who are familiar with local building and
safety codes and, wherever applicable, are licensed by the appropriate government
regulatory authorities should install outdoor units and antennas.
Failure to do so may void t expose the he BreezeACCESS product warranty and may
end user or Service Provider to legal and financial liabilities. Alvarion and its resellers or
distributors are not liable for injury, damage or regulation violations associated with the
installation of Outdoor Units or antennas.
To door-to-outdoor Ethernet cable (VL units with a service
box supplied with the Ethernet cable):
connect the in
To ct the RF cable (AU): conne
Cell Extender System Manual
2-12