Alva Nanoface Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 25

Alva Nanoface Скачать руководство пользователя страница 2

2

3

Contents

Disclaimer

4

What is the Nanoface?

6

Quick Info

Cable connectors . Encoder operation overview . Peakmeters

12

Getting started

Connection . Driver Installation

18

Using the Nanoface

Encoder operations

28

Connecting equipment

Outputs

37

Connecting equipment

Inputs

The information contained within this manual is solely advisory.

ALVA is not responsible for actions you may take without proper advice. You should not rely on this information as absolute and are
responsible for understanding the given information. You should not rely on this information as absolute. If you do act upon the suggestions
contained in this document, you are fully responsible for yourself and your actions.

Should the information in the Nanoface manual prove to be false, misleading, or in contravention to law, statute, or regulation, you assume
all risks.

ALVA does not accept responsibility for any loss, damage or expense resulting from the use of this information contained in the manual, even
if the information was false, misleading, or in contravention to law, statute, or regulation.

Please send feedback, comments and corrections to [email protected]

The Nanoface manual © 2012 ALVA. All rights reserved.
All Nanoface features and specifications are subject to change without notice.

Mac OS X is a trademark of Apple Inc.
CoreAudio is a trademark of Apple Computer, Inc.
Microsoft, Windows XP, Windows Vista, Windows 7 are trademarks of Microsoft Corp.
Alesis and ADAT are registered trademarks of Alesis Corp.
Steinberg, Cubase and VST are registered trademarks of Steinberg Media Technologies GmbH.
ASIO is a trademark of Steinberg Media Technologies GmbH.

Other trademarks are the property of their respective owners.

«
1
2
3
4
...
»

Содержание Nanoface


























Отзывы:

Нет отзывов