Consult your gas dealer if the
leak persists after tightening
the joints. (Fig. 7)
•
Place the gas cylinder at least
0.5m away from the stove in an
upright position. (Fig. 8)
•
Only use LPG gas.
•
For safety reasons, the control
/ignition knobs are designed
to operate in anti-clockwise
rotation.
•
In the event of a burn back (i.e. where the gas burns back
on to the jet), turn off the stove and light again. Should the
problem persist, take the unit back to your dealer to be
checked.
•
Turn the stove off at the switch controls
•
Disconnect the regulator and wait for the stove to cool
down (± 30 minutes)
•
If on relighting, the problem reoccurs, get the unit
checked by an authorised service dealer
•
Always check that the regulator seal is in place and in good
condition. Always ensure that the hose clamps are tightened
and in place. Always ensure that the hose does not show
any signs of wear. If in doubt please consult your dealer.
SETTING UP YOUR COOKER
1. Confirm that you have the right
model for your type of gas
supply.
2. When unpacking, make sure
that all of the parts of the gas
cooker are included. Assemble
the parts as shown in Fig. 9.
3. Place the gas control knob
onto the gas cock axis and
push it inwards. (Fig. 10)
Fig.8
0.5m
Fig.9
Fig.10
OFF
OFF
MAX
MIN
P
U
S
H
4
