Alutech LG-500, Руководство по сборке и эксплуатации

Страница: 60 / 82

ПРИВОД LG-500 | LG-500 DRIVE)
58
GENERAL WARNINGS AND SAFETY RULES
1. GENERAL WARNINGS AND SAFETY RULES
Y
ATTENTION! This manual contains important information concerning safety. Prior to com-
mencing installation study closely all the information provided below. Save this manual for
future reference!
Mounting, connections, final tests of the equipment, commissioning and maintenance should
be performed only by qualified and trained specialists.
Follow the precautions provided by any active regulatory documents and by those in this manual.
Please, ensure compliance with the requirements of standards concerning the construction,
mounting and operation of automated doors (EN 12604, EN 12453, EN 13241-1), as well as other
possible local rules and regulations.
Mounting, programming, configuration and operation of the product in violation of the require-
ments are prohibited, as this can result in damages, injuries and cause losses.
Making any changes in any elements of the product structure and unintended use of the product
are prohibited. The manufacturer is not liable for any damages, caused by unauthorised changes
in the product or its unintended use.
The product is constructed for use in dry buildings and is not intended for use in the presence
of acid, salt or explosion hazard media.
When performing any works (mounting, repair, maintenance, cleaning etc.) and connections
inside the drive, disconnect the mains circuit. If the master switch or similar device is out of
sight, then attach a safety sign stating: ‘ Do not turn on . People are working ’ and take measures
preventing the possibility of accidental restoring the power supply.
In the case of power cable (power cord) damage, it should be replaced by a manufacturer’s
specialist or maintenance department specialist.
Please, follow the safety measures when using the power cable:
• fully insert the plug into the socket;
• when taking the plug out of the socket do not pull by the cord;
• do not use a socket with bad contacts;
• do not touch a plug with wet hands;
• do not damage the power cable, do not twist the cable, do not bend and do not stretch it;
• do not place heavy objects on the power cable and do not place it near hot objects;
• ensure easy access to the socket;
• use only the power cable supplied by the manufacturer;
• it is forbidden to use a defective or damaged power cable.
The company reserves the right to introduce changes in this manual and the product construc-
tion without prior notification, but preserving the same functional capabilities and designation.
The content of this manual cannot be used as the basis for legal claims.
2. PRODUCT DESCRIPTION
LG-500 drive with a drive rail is designated for the automation of balanced sectional garage
doors. The drive with a drive rail establishes it as a set for the automation of a garage door.
The drive consists of a gear-motor with electric motor, 24 V DC transformer, electric control unit
with built-in radio control module and LED lighting. The drive is powered from by 230 V / 50 Hz