- 6 -
2020.02.17
1
We reserve the right to any technical change. Valid on 2020.01.27
PROGRAMING MANUAL FOR DM MOTORS, SERIES DM R
1. TECHNICAL SPECIFICATIONS
PROGRAMING MANUAL FOR DM MOTORS, SERIES DM R
In accordance with the provisions of the Directive of the European Parliament and of the Council 2012/19 / EU of 4 July 2012 on waste electrical and
electronic equipment (WEEE), it is prohibited to place of used equipment together with other wastes, marked with crossed out wheeled bin symbol.
The users are obliged to transfer their used equipment to a designated collection point for proper processing. The marking means, at the same time,
that the equipment was put on the market after 13 August 2005. These legal obligations have been introduced to reduce the amount of waste
generated from waste electrical and electronic equipment and to ensure an appropriate level of collection, recovery and recycling. The equipment
does not contain any dangerous components, which would have any particularly negative impact on the environment and human health.
- Power supply: ~230V/50Hz
- Mechanical limit swiches
- Bulid in radio receiver
- Frequency: 433.92 Mhz
- Radiated power: 10 miliwat (mW)
- Operating temperature: ~ -10°C ~ +55°C (protection degree IP44)
- Average range:
200 meters (in open space)
35 meters (inside buildings)
- Ability to store up to 20 channels in one tubular motor. Each next channel will erase the first one
Company reserves the tolerance of catalog data due the different conditions usage.
All DC series transmitters available in the ALUPROF offer are suitable for the radio control.
2. ELECTRICAL CONNECTIONS
Power supply: 230V / 50Hz
- Installation of the motor should be carried out by authorized persons.
NOTE
- The motor is designed for use in dry rooms and should not be exposed to direct weather conditions.
- The motor should be powered by a separate circuit and protected by a quick fuse for example: circuit breaker type B10
DM35R
DM45R
MANUAL FOR DM MOTORS, SERIES R
DM45R