2
We reserve the right to any technical change. Valid on 2019.09.18
3. SWITCH CONFIGURATION
If pause between pressing buttons is longer than 60 seconds transmitter will exit setting mode
Turn the power on
3.1. Memorizing the transmitter
Press the UP and DOWN
Press the UP and DOWN
buttons simultaneously for
buttons simultaneously
2 seconds
for 2 seconds
The LED should blink
The LED should blink
Press „STOP” button
Press „STOP” button
The LED is lightining
The LED is lightining
Pres the „UP” buton on the
remote controller
The LED will blink 3 times
The transmitter has been
added correctly
3.2. Kasowanie nadajnika
Turn the power on
Pres the „DOWN” buton
on the remote controller
The transmitter has been
3.3. Mode change (with or without suport)
Turn the power on
Press the UP and STOP buttons
simultaneously for 5 seconds
The operating mode has been
The LED will blink 3 times
Executing the procedure
again will cause return to the
previous mode.
3.4. All programmed transmitters have been deleted
The LED will blink 3 times
Turn the power on
Press the DOWN and STOP
buttons simultaneously for
5 seconds
The LED will blink 3 times.
All programmed transmitters
have been deleted
deleted correctly
changed
