2
We reserve the right to any technical change.
Valid on 2022.02.09
PROGRAMMING INSTRUCTIONS FOR THE WALL TRANSMITTER: DC1675 AND DC1676
4. ACTIVE CHANNEL SELECTION
Switch to automatic or
random mode.
Select the chosen channel.
Hold down the “K-” button
for 3 seconds, digits of the disabled
Holding the “K-” button again
for 3 seconds turns on the
channel will flash.
selected channel.
3. OPERATING MODE CHANGE
Press and hold the “MODE”
button for 3 seconds. The mode
By reapitting procedure
will be changed.
will change mode between:
“Manual”,
“Automatic”,
“Random”.
Manual mode - without time control function,
Automatic mode - with time control function,
Random mode - with time control function with a random selected time within ± 15 minutes to the set automatic time.
The function only applies to the DC1676 transmitter. By default, all channels are active.
