3
We reserve the right to any technical change.
Valid on 2022.01.27
PROGRAMMING MANUAL FOR AM45 MOTORS ER-P SERIES
5. MEMORIZING THE TRANSMITTER
4. SWITCH TO PROGRAMMING MODE
Turn on the motor’s power supply.
Press and hold the
programming button
on the motors head
The motor will make a short
move DOWN - UP.
for 2 seconds.
Press the „UP” button.
The transmitter has been added.
Turn on the motor’s power supply.
Press and hold the „STOP”
button for 5 seconds.
Programming mode
activated.
Press and hold “TOP” button.
After 3 seconds, turn on the power to
the motor. Release the button.
II
I
III
Programming mode activated.
Programming mode
activated.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
For the AC116-04 transmitter, instead of the „UP” button, press the selected channel number twice.
Switch to programming mode
according to point 4.
Is
important
to adjust the sensitivity of the overload mechanism to the size of the roller shutter.
