background image

31

  

   

Language:

 

English  

Model

Netti 4U comfort|CED  Version: November 2010

netti rullestoler

Language:

 

English  

Model:

 

Netti 4U comfort|CED

  Version: 

November 2010   

   

Language:

 

English  

Model

Netti 4U comfort|CED  Version: November 2010

Language:

 

English  

Model:

 

Netti 4U comfort|CED

  Version: 

November 2010   

Netti 4U comfort|CED has been  

       crash tested without any power kit
       etc.  If, at a later point of time a 
       power kit, stair climber etc. is 
       mounted this must be dismounted
       if the wheelchair is to be 
       transported

9. MAINTENANCE

9.1 Maintenance    

 

      instructions

The netti chairs are built of modules. alu  
rehab carries stock of all parts and is 
ready to supply these on short notice. 
necessary instructions for mounting will 
follow the parts.
Parts to be handled by user are defined 
in spare part catalogues that can be 
downloaded at www.alurehab.com. These 
parts can, if needed, also be removed and 
sent to manufacutrer/distributor upon 
request.
Parts related to wheel frame construction 
must be handled by manufacturer or 
authorized sercvice facility. 

You can order original paint from  

       Alu Rehab to repair scratches and  
       minor damages to the paint:
       Please contact your dealer to 
       order.  

If defects or damages occur, 

       please contact your dealer.       

Check/re-adjust screws and nuts 

       at regular intervals.

Sand and sea water (salt used for 

       gritting in the winter) can damage  
       the bearings of the front castors  
       and main wheels.  Clean the    
       wheelchair thouroughly after use.

Frequency

 

Weekly

monthly

Check defects/damages 
E.g. breakage/missing 
parts

X

Washing of wheelchair

X

Oiling of bearings*

X

Washing of cushions

X

Check anti tip function

X

Check brake adjustment

X

Check tyre wear

X

*  as a rule of thumb, use oil on movable          
   parts and all bearings.  alu rehab   

       

   recommends use of ordinary bicycle oil

9.2 Cleaning and washing 

1. remove cushions before washing       

      

   the wheelchair.
2. Clean cushions and covers according to 
    instructions printed on cushions.

 

Cushion cleaning procedures

CORE
Washing

Hand wash 40ºC

Disinfection

Virkon s
auto clave 105ºC

Drying

squeeze
air dry standing edgewise

OUTER COVER
Washing

machine wash 60ºC

Drying

Tumble dry max 85ºC

3. Clean frame using water and a rag.
4. If jet water washing, avoid pointing  

     

    directly towards gas springs, labels and  

     

    back cushion.

5. We recommend using soft soap.
6. Wash the wheelchair well using clean  

        

    water to remove all the soap.
7. use methylated spirit to remove any  

        

    dirt left.

Содержание Netti 4U comfort|CED





































Отзывы: